Aspire Nautilus AIO fits comfortably in the hand in use and is very discreet. It utilizes Aspire’s famous Nautilus BVC coils rated at 1.8 ohms and comes with a regular coil and a second one for use with nicotine salts.
Advarsel: Sidste enheder på lager!
På lager:
| Type | E-cigaretter |
| mAh | 1000 |
| Ohm | 1.8 |
| Mærke | Aspire |
| Farve | Sort, Sølv, Blå, Lilla, Rød, Grøn |
| Egenskab | Air flow |
| Velegnet til | Begynderen, Erfaren, Øvet |
| Batteri(er) | Indbygget batteri |
| TPD | Godkendt |
The Aspire Nautilus AIO is sleek, ergonomic, has a palm sized design and fits well into a pocket or purse. In keeping with Aspire’s vision of letting people choose their vaping preference, the Aspire Nautilus AIO has an adjustable airflow system to suit your vaping preference.
The Aspire Nautilus AIO atomizer is the famous and popular Nautilus BVC coil, it also uses nichrome wire. The Aspire Nautilus AIO comes supplied with two coils both rated at 1.8 ohms, one for regular e-liquid and one for use with nicotine salts, though it works equally well with normal e-liquid.
The pod in the Aspire Nautilus AIO is an easy to use bottom fill, using a simple but effective silicone plug in the base of the pod, with a generous 4.6mm filling hole, to suit all types of e-liquid bottle.
Changing the coil on the Nautilus AIO, is easy as ever. Simply remove the pod by squeezing the side buttons on the device, then remove the pod and turn it upside down, push down the airflow control ring and unscrew to disengage the airflow component, detach the coil from the airflow control ring and replace it with a new one. Relocate the airflow component with attached coil back to the pod, and push the pod back into the Nautilus AIO until it clicks.
Note: When relocating the airflow component, please also screw and push down at the same time.
When filling Aspire Nautilus AIO, simply remove the pod from the device by squeezing the two side buttons, invert the pod and just push down the tip of your filling bottle into the spring loaded 2.5mm diameter filling port. Squeeze the filling bottle to add your preferred e-liquid into the pod system through the hole. release the pressure on your filling bottle prior to releasing the pressure on the filling port. Re-inset the pod into the power unit and push down firmly until it 'clicks' into place.
Charging the Aspire Nautilus AIO is also very simple. Just plug in the supplied micro usb cable into the side of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1A. When attached to the usb with the power on the LEDs will flash blue and orange three times, when fully charges the LEDs will flash blue and orange twenty times then remain off.
1* Nautilus AIO device
2* 1.8Ω coils (1 regular BVC & 1 for Nic Salt)
2* Extra O rings
1* Micro USB Cable
1* Warranty Card
1* User Manual
